N Series Stalls & Rolled Alley Flooring

Cow comfort and profitability from the ground up!

• Established in 1925
• Made in Germany
• Only new tire rubber compound 
• PAH and ISO 9000 certified
• 10-15 Year Warranty

• Virgin tire compound equals consistent quality
• Skid resistant pebbled surface
• Non-absorbent and urine resistant
• Precision-fit installation for minimal herd disruption
• Softness to emulate a pasture feel

At Agri-Comfort we will FLOOR YOU with our Huber Technik rolled rubber flooring. All of our continuous rolls can be cut to customized lengths to ensure minimal joints or seams in your stalls or floors. All our stall and flooring options are exceptionally flexible and provide a high level of slip-resistance. Coupled with 100% new tire compound, all rolls are fabric interlined for added strength.

The N15 walkway roll is an ideal parlor floor, the N18 walkway flooring is exemplary in alleys providing comfort and sure footing. Our N20 and N33 rolls provide even higher shock absorption for increased comfort in stall applications. The raised lugs act as shock absorbers and allow liquids to run freely underneath.

Choose from 4 different options:

N-15 Rolls

Ideal for: Alleyways, Holding areas, Parlors
Thickness: .59″ / 15mm
Width: 19.7-118.1″ / 500mm-3000mm in steps of 3.93″ / 100mm
Length: 32.8-229.7′ and 164′ / 10-70m and 50m
Warranty: 10 years
Features: Smallest studded underside provides cushion and traction. Deflection/Penetration depth of .17″ / 4.3mm

N-18 Rolls

Ideal for: Alleyways, Holding areas, Parlors
Thickness: .7″ / 18mm
Width: 19.7-118.1″ / 500mm-3000mm in steps of 3.93″ / 100mm
Length: 32.8-229.7′ and 164′ / 10-70m and 50m
Warranty: 10 years
Features: Small studded underside provides cushion and traction. Deflection/Penetration depth of .03″ / 10.7mm

N-20 Rolls

Ideal for: Free Stalls and Tie Stalls
Thickness: .79″ / 20mm
Width: 47.25-78.74″ / 1200mm-2000mm
Length: 32.8-164′ / 10-50m
Warranty: 10 years
Features: Medium studded underside provides cushion and traction. Deflection/Penetration depth of .03″ / 10.7mm

N-33 Rolls

Ideal for: Free Stalls and Tie Stalls
Thickness: 1.3″ / 33mm
Width: 74.8″ / 1900mm
Length: 32.8-131.2′ / 10-40m
Warranty: 15 years
Features: Largest studded underside provides cushion and traction. Deflection/Penetration depth of .67″ / 17mm

Frequently Asked Questions

  1. What is rubber?
    Today, the word rubber denotes many synthetic materials with elastic properties in addition to natural rubber. Rubber has the ability to cross-link under heat and high pressure. This process provides rubber with the desired and final form. This rubber-specific cross-linking ability is called vulcanization. This process happens only once and it cannot be reversed.
  2. Is it new rubber or a rubber regenerate?
    Vulcanized rubber cannot be melted and newly pressed. It can only be broken up with a high amount of energy. Regenerates come mainly from broken up old tires. They have little binding strength left (ability to crosslink). In order to re-shape them, bonding agents must be used. Regenerates are primarily suitable for relative hard, large-volume components.
  3. Is it natural rubber or a tire mixture?
    Huber Technik uses only new tire rubber, with a minimum of 90 % of it having not been vulcanized (new rubber). Tire mixtures contain valuable additives, which assure age-resistance. Lower priced natural rubber mixtures do not contain those stabilizers. Therefore, the influence of light and air (ozone) easily makes them brittle. A high specific weight (>1.2) is an indicator for a high amount of fillers (chalk) in the rubber compound. Fillers make the compound heavier and cheaper. A high amount of filler is not an advantage for a product’s elasticity and durability.
  4. What does wear-and-tear resistance mean?
    To determine wear-and-tear ability of rubber products, tear resistance, stretching ability at the breaking point, and abrasions are primarily examined. These criteria are clearly superior in new rubber. Why do you need a inner liner of fabric? Coverings made of high-quality new rubber must not be very thick in order to offer elasticity, comfort, and durability. The fiber insert made of polyamide polyester stabilizes surface coverings and minimizes rubber-specific stretching. In thin surface covers, the fiber must carry the load. The rubber provides solely a protective surface and wear-and-tear protection.